|
LEV Specifications:
General:
Rated load: 950 lbs. (430 kg) (750 and 700 lbs. available)
Speed: 40 fpm (.20ms)
Data plates and capacity tags
Minimum pit depth: 6"
Minimum overhead clearance: 8-6" (optional hydraulic drive requires
8-0")
Maximum travel: 50
Maximum number of stops: 5 (minimum 17 travel between stops)
Presentation drawings
Mechanical Equipment:
208/230V, 60 Hz, 20 amp single phase power supply
Modular dual 6-1/4 lb. T-rail system
Two #60 roller chains
Sling assembly
Counterweighted chain drive with frequency controlled variable speed
geared machine; also available as hydraulic drive with submersed pump
assembly and 2 speed valve
Car and Appointments:
Car sizes: 36" x 48" (12 sq ft), 36" x 60" (15 sq ft), 40" x 54" (15
sq ft), Inside car height is 84". (Custom sizes are available between 12
sq ft and 15 sq ft.- consult factory)
Durable melamine wall panels (champagne, light oak, dark oak or white)
White ceiling
Two recessed lights with white bezels
Wooden handrail to match wall panels
Accordion car gate (champagne, chalk, light oak, dark oak or white)
Unfinished plywood floor (with removable insert for 3/4 thick
finished floor by others)
Digital floor position/diagnostic indicator
Telephone
Controls:
Programmable Logic Controller (PLC) with Intelฉ digital signal
processor
Fully automatic operation
Car operating panel (brushed stainless steel or brass)
Brushed stainless steel or brass hall stations with digital position
indicators and call acknowledgement
Automatic car lighting with constant on switch
Automatic homing to a predetermined floor
Bi-directional leveling
Emergency stop switch
Emergency alarm button
Hoistway wiring with conduit (hall stations / interlocks)
Uninterruptible power supply (UPS) for lowering and automatic gate
operation (if supplied) in case of a power failure
Safety Devices:
115 VAC lockable auxiliary disconnect for car lighting circuit
208/230 VAC lockable auxiliary disconnect for drive unit circuit
Upper and lower terminal limits
Final limits (2 upper, 1 lower)
Slack chain/rope safety
Pit switch
Car top stop switch
Battery backup emergency light and alarm
Car gate safety switch
Electromechanical interlocks (for doors by others)
Other Options:
Unfinished wood veneer panels (oak, cherry or birch)
Unfinished raised panel wood walls (oak, cherry or birch)
88" and 94" car heights
Recessed telephone cabinet (brushed stainless steel or brass, or
polished stainless steel or brass)
Factory applied finish to wood wall panels and handrail
Matching wood veneer ceiling panel with raised wood or veneer wall
panels
Telephone cabinet, hall stations and car operating panel can be
provided in polished stainless steel or brass
Metal handrail (brushed stainless steel or brass, or polished
stainless steel or brass)
Automatic car gate operator with light beam safety curtain
Automatic hoistway door operator
External modem for remote diagnostics
Remote machine room elevator controller
Installation/inspection pendant control
Counterweight safety device
Buffer springs (requires 12 deep pit minimum)
Car Gate Upgrades:
Accordion car gate with 3 clear vision panels
Accordion car gate with all clear vision panels
Deluxe Visifoldฎ car gate
Accordion car gate with solid aluminum panels with clear or brass
anodized finish
Accordion car gate with perforated aluminum panels with clear or brass
anodized finish
Control Upgrades:
Key switch controls in car operating panel and/or hall stations |
